1950 to 1952 or 1953 to 1954
Lambretta Spare Parts Catalogue LC(?) / LD Side Panels
Information to be confirmed if this is for a 1950 / 1952 or 1953 to 1954 side panel.
Panels look very similar. However, there is a one inch length difference.
The shape is also slightly different.
“Lambretta LD Parts Catalogue 1950 to 1952 or 1953 to 1954 – To Be Confirmed (2 inch difference!)”
| Figure | Code | RELATED PARTS |
| 1 | 8181036 | Left side |
| 2 | 5180220 | Socket for left pedanina |
| 3 | 8181046 | Left pedestal |
| 4 | 544010 | Pedanine fixing nut |
| 5 | 523203 | Rosette for pedanine fixing nut |
| 6 | 5180222 | Rubber profile for sides |
| 7 | 8181031 | Right side |
| 8 | 5180236 | Gasket crown for air exhaust vent holes |
| 9 | 5180240 | Pad for inspection hatch |
| 10 | 8181051 | Inspection door with zip |
| 11 | 5180229 | Door hinge pin |
| 12 | 5180228 | Door retainer spring |
| 13 | 5180219 | Socket for right pedanina |
| 14 | 8181041 | Passenger footboard LD |
| 15 | 8090300 | Complete left side hook, with partico |
| 16 | 8090301 | Hook for right side panel complete with particolar |
| 17 | 5180202 | Left side hook handle (LC/LD) |
| 18 | 5180201 | Right side hook handle (LC/LD) |
| 19 | 5180203 | Grain fixing handles |
| 20 | 5180205 | Sliding compass |
| 21 | 513008 | Splint |
| 22 | 5180238 | Cap holding cup |
| 23 | 5180242 | Seal protection cap hook ring |
| 24 | 5180207 | Pressure spring |
| 25 | 5180206 | Spring support cup |
| 26 | 533412 | Seeger ring for latch |
| 27 | 5180235 | Hood for hook protection |
| 8 | 08180246 | Side panel grills in white plastic with clips for 125 & 150 LD MK I & II models until mid 1956. |
| 12090367 | Side panel grills for LD MK II & MK III models (1 pair) | |
| 12090368 | R/H Side panel handle mechanism | |
| 12180268 | L/H Side panel handle mechanism | |
| 12180269 | Side panel grills for LD MK II & MK III models (1 pair) – Chrome plates – NOT compatible with these side panels | |
Views: 148