[hr_shadow]
Hi Ian,
Email received with thanks and thank you for calling as well.
I replied to your email and asked that you look at this News Post for information, as my email may go straight to your Junk / Spam area. If your reading this on the website and did not receive the email, please check your Junk / Spam folders for any further email replies if needed.
LD jumping out /off first gear and also difficult to select?
I raised a question for you on the LCGB Lambretta Forum for the 1st gear popping out and it being difficult to select gears and “jbcollier” replied. He is a very helpful chap and has a wealth of knowledge and information on Lambrettas.
Here is the link. I hope that it may help:
LD Gearbox – Stripping Down & Images
For the Lambretta Gearbox itself, I quickly stripped down a Teleflex LD Gearbox over the weekend and have published images. This Gearbox had three washers (x2 on one end and x1 on the other) and all washers were the same size and as follows:
- 1.0mm thick
- 20.4mm outside diameter
Please select this link (Or go to the menu and look under Restores and Rebuilds) to read the information:
I have left the Lambretta gearbox section stripped down at the moment, so if you need any further images or information over the next week or so, let me know.
Manuals
There are a selection of manuals and links on the website (Lambretta LD Manuals – Click Here), if you need any. I have a number more, but no time to scan and upload at the moment. Let me know if you require a specific one if you cant find any on this page and I will endeavour to scan it in.
I hope this is of some help and helps you solve the problem. If you do manage to solve it and would be happy to share the information, please do.
All the best and good luck.
John
LambrettaJourney