[hr]
Lambretta LD Clutch Cable Install.
For indexing purposes, this post applies to Lambretta LD 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958.
[hr]
The You Tube video link below shows how to install a Lambretta LD Clutch Cable.
Information and Notes
From the Lambretta Serviceman’s Book (Page 40)
The clutch is adjusted by the knurled screw at the hand lever, but the cable must not be at all tight and there should be at least three quarters free movement at the tip of the lever. When no further adjustment remains at the lever end, remove the 19mm domed nut from the centre of the clutch cover on the offside at the front the engine compartment and slacken the two 8mm hexagon nuts locked together on the end of the clutch withdrawal pull rod beneath, using suitable thin spanners. Set the nuts in a position which will allow the adjustment of the handlebar end to be restored and re-tighten
References / Manuals
[ngg_images source=”galleries” container_ids=”8″ display_type=”photocrati-nextgen_basic_thumbnails” override_thumbnail_settings=”0″ thumbnail_width=”240″ thumbnail_height=”160″ thumbnail_crop=”1″ images_per_page=”20″ number_of_columns=”0″ ajax_pagination=”0″ show_all_in_lightbox=”0″ use_imagebrowser_effect=”0″ show_slideshow_link=”0″ slideshow_link_text=”[Show slideshow]” order_by=”sortorder” order_direction=”ASC” returns=”included” maximum_entity_count=”500″]